Selecting A User Key - Precor LOW-IMPACT TREADMILLS 9.33 Owner's Manual

Selecting a USER Key

To start your exercise session using personal identification
and preferences set up in Adding a User, take the following
steps:
1. At the banner, press the same USER key you designated
in step 1, Adding a User.
Note: Refer to User Identification if you have not
previously chosen a USER key.
A welcome greeting scrolls across the display and the
last program associated with the USER key appears.
User preferences such as weight and age are re-instated.
The time or distance goal associated with the displayed
program also applies.
Owner's Manual: Workout Options
2. Press OK to select the program being displayed or
choose another program using the navigational arrow
keys or the PROGRAMS keypad. Refer to Selecting a
Program for information about how to choose a program.
Important: If you make an entry error, press PAUSE/
RESET to return to the banner.
3. If needed, enter the safety code by pressing: 1, 2, 3, 4.
An asterisk appears on the display with each entry.
BELT STARTING scrolls across the display. A 3-second
countdown appears and then the running belt starts
moving.
4. Step on to the running belt with the speed at or below
1 mph or 1 kph and begin exercising. Use the SPEED
arrow keys to increase or decrease the speed of the
running belt.
34