Adding A User - Precor LOW-IMPACT TREADMILLS 9.33 Owner's Manual

Adding a User

To add a user, select a user number by taking the following
steps:
1. At the banner, press a USER key. A blinking line prompts
you to enter the first letter in your name.
2. Use the alphabet, on the number keypad, to enter your
name. To enter a letter, press the appropriate number key
repeatedly until the desired letter appears. To erase a
letter, press the CLEAR key.
3. Wait until the next cell blinks and continue the process
until your name or identification is complete.
Note: Blank spaces between letters are not allowed.
Owner's Manual: User Identification
4. When you are satisfied with your name or user
identification, press OK.
5. The display then prompts you to enter your weight and
age.
Use the navigational arrow keys or number keys to
answer each prompt, and then press OK. With each
successful entry, you move onto the next prompt. After
the age prompt, the display indicates that the user setup
is complete and resets to the banner.
Note: The 9.33 treadmill retains entries even if you exit
the user setup process prior to answering all the
prompts. When you press the same USER key, the setup
process is initiated and the prompts display your existing
entries. Press OK to accept each entry and move on to
the next prompt.
To begin an exercise session using your USER key, refer to
Selecting a USER Key.
28