Selecting A User Key - Precor 9.23 Owner's Manual

Selecting a USER Key

To start your exercise session using personal identification
and preferences set up in Adding a User, take the
following steps:
1. At the banner, press the same USER key you
designated in step 1, Adding a User.
Note: Refer to User Identification if you have not
previously chosen a USER key.
The last program associated with the USER key
appears. User preferences such as time, weight, and
age are re-instated.
The time or distance goal associated with the displayed
program also applies.
Owner's Manual: Workout Options
2. Press ENTER to select the program being displayed or
choose another program using the arrow or the
PROGRAMS keys. Refer to Selecting a Program for
information about how to choose a program.
Important: If you make an entry error, press STOP/
HOLD TO RESET or wait 30 seconds to return to the
banner.
BELT STARTING scrolls across the display. A
3-second countdown appears and then the running
belt starts moving.
3. Step on to the running belt with the speed at or below
1 mph (1.6 kph) and begin exercising. Use the SPEED
arrow keys to increase or decrease the speed of the
running belt.
32