Installing The Inner Rails On The Chassis - Supermicro 6039P-E1CR16L User Manual

Note: Both front chassis rails and the rack rails have a locking tab, which serves two functions.
First, it locks the server into place when installed and pushed fully into the rack. Second, these
tabs lock the server in place when fully extended from the rack. This prevents the server from
coming completely out of the rack when pulled out for servicing.

Installing The Inner Rails on the Chassis

Installing the Inner Rails
1. Place the inner rail firmly against the side of the chassis, aligning the hooks on the side
of the chassis with the holes in the inner rail.
2. Slide the inner rail toward the front of the chassis until the rail clicks into the locked
position, which secures the inner rail to the chassis.
3. Secure the inner rail to the chassis with the screws provided.
4. Repeat steps 1 through 3 for the second inner rail.
Note: Chassis pictured might vary slightly from the 6039P-E1CR16H/L system chassis.
Warning: Do not pick up the server with the front handles. They are designed to pull
the system from a rack only.
Figure 2-2. Installing the Inner Rails
21
Chapter 2: Server Installation
1
2
1
3