Supermicro 6039P-E1CR16L User Manual page 58

SuperStorage Server 6039P-E1CR16H/L User's Manual
M.2 LED
An M.2 LED is located at DLE1 on the motherboard. When DLE1 is blinking, M.2 functions
normally. Refer to the table below for more information.
Onboard Power LED
The Onboard Power LED is located at LEDPWR on the motherboard. When this LED is on,
the system is on. Be sure to turn off the system and unplug the power cord before removing
or installing components. Refer to the table below for more information.
Unit ID LED
A rear UID LED indicator (UID-LED) is located near the UID switch on the I/O back panel.
This UID indicator provides easy identification of a system unit that may need service.
SAS Activity LED
A SAS Activity LED is located at LEDSAS. When LEDSAS flashes, it indicates activity on a
SAS port.
M.2 LED State
LED Color Definition
Green: Blinking Device Working
Onboard Power LED Indicator
LED Color Definition
System Off
Off (power cable not
connected)
Green System On
UID LED
LED Indicator
LED Color Definition
Blue: On Unit Identified
SAS Activity
LED Indicator
LED Color Definition
Green:
SAS Active
Blinking
Red SAS Error
58