Table of Contents
Advertisement
Release Tab
3.3 Motherboard Components
Processor and Heatsink Installation
Follow the procedures in this section to install a processor (CPU) and heatsink onto the
motherboard. Improper CPU installation or socket misalignment can cause serious damage
to the CPU or motherboard which might require RMA repairs.
Notes:
•
Remove power from the system as described in Section 3.1 before installing the proces-
sor and heatsink.
•
When handling the processor package, avoid placing direct pressure on the label area of
the CPU or socket.
•
Assemble the processor and heatsink to form the Processor Heatsink Module (PHM), then
install the PHM into the CPU socket.
•
When receiving a motherboard without a processor pre-installed, verify that the plastic
CPU socket cap is in place and none of the socket pins are bent. Otherwise, contact your
retailer immediately.
•
Refer to the Supermicro website for updates on CPU support.
Chapter 3: Component Installation and Maintenance
1
3
Figure 3-1. Removing the Chassis Cover
25
1
4
1
3
2
Remove screw
Advertisement
Table of Contents
