Installing The System Into A Rack; Identifying The Sections Of The Rack Rails; Releasing The Inner Rails - Supermicro 6039P-E1CR16L User Manual

SuperStorage Server 6039P-E1CR16H/L User's Manual

2.3 Installing the System into a Rack

This section provides information on installing the 836BE1C chassis into a rack unit with the
rails provided. Due to the variety of rack units on the market, the assembly procedure might
differ slightly. Also refer to the installation instructions that came with the rack unit you are
using.

Identifying the Sections of the Rack Rails

The 6039P-E1CR16H/L includes a rack rail assembly in the rack mounting kit. Each assembly
consists of two sections: An inner chassis rail that secures directly to the chassis and an
outer rail that secures to the rack. Each assembly is specifically designed for the left or right
side of the chassis.

Releasing the Inner Rails

Follow the steps below to release the inner rails from the outer rails.
Releasing the Inner Rails from the Outer Rails
1. Identify the left and right outer rail assemblies.
2. Pull the inner rail out of the outer rail until it is fully extended as illustrated below.
3. Press the locking tab down to release the inner rail.
4. Remove the inner rail from the outer rail.
5. Repeat steps 2-4 for the second outer rail.
Figure 2-1. Extending and Releasing the Inner Rails
1
2
3
4
20