Installing The Inner Rails On The Chassis - Supermicro SSG-927R-E2CJB User Manual

SSB-927R-E2C-JB User's Manual

Installing the Inner Rails on the Chassis

Installing the Inner Rails
1. Identify the left and right inner rails. They are labeled.
2. Place the inner rail firmly against the side of the chassis, aligning the hooks on
the side of the chassis with the holes in the inner rail.
3. Slide the inner rail forward toward the front of the chassis and under the hooks
until the quick release bracket snaps into place, securing the rail to the chassis.
4. If desired, add screws (flat head M4 x 4mm) through the rail into the chassis
for extra security.
1
4
Figure 2-3. Installing the Inner Rails
2-6
Inner Rails
1
3
1
4
1
2