Supermicro 6039P-E1CR16L User Manual page 56

SuperStorage Server 6039P-E1CR16H/L User's Manual
ME Manufacturing Mode
Close pins 2-3 of jumper JPME2 to bypass SPI flash security and force the system to operate
in manufacturing mode. This allows the user to flash the system firmware from a host server
for system setting modifications. Refer to the table below for jumper settings. The default
setting is Normal.
SAS HDD Enable/Disable
JPSAS1 allows you to enable the SAS HDD. See the table below for jumper settings.
SAS 3.0 Enable/Disable
JPS1 allows you to enable the onboard SAS 3.0 ports. See the table below for jumper settings.
Manufacturing Mode
Jumper Settings
Jumper Setting Definition
Pins 1-2 Normal
Pins 2-3 Manufacturing Mode
SAS HDD
Jumper Settings
Jumper Setting Definition
Pins 1-2 Enabled
Pins 2-3 Disabled
SAS Enable/Disable
Jumper Settings
Jumper Setting Definition
Pins 1-2 Enabled
Pins 2-3 Disabled
56