Using The On-Screen (Virtual) Keyboard - EXFO MaxTester series User Manual

Getting Started with Your Unit

Using the On-Screen (Virtual) Keyboard

Using the On-Screen (Virtual) Keyboard
Your unit is equipped with an on-screen keyboard that is displayed
automatically when you select any location where data entry is possible.
Note: You can close the keyboard temporarily with the
button (located in
the lower-right corner of the virtual keyboard). Next time you select a
location where data entry is possible, the keyboard will be displayed again
automatically.
By default, the keyboard layout is set to QWERTY, but you can select any of
the provided layouts. You can also hide the virtual keyboard so that it is not
displayed when you select a location where data entry is possible. This
could be particularly useful when you connect a hardware keyboard to
your unit. For more information about the choice of another keyboard
layout, or the way to hide the keyboard, see Selecting the Layout of the
On-Screen Keyboard on page 46.
To use the on-screen keyboard:
1. Select the location where you want to enter text.
2. Enter the data as required.
3. Exit the location when you have finished entering data.
29
MaxTester Series