Table of Contents
Advertisement
7. By holding the power meter by its faceplate, gently pull it out of the bay
completely.
8. Place the power meter in an antistatic bag.
9. If you have a protective cover, proceed as follows:
9a. Carefully place the cover over the power meter bay.
9b. Using a screwdriver, secure the protective cover in place with all
10. Remove your antistatic strap.
11. Connect your unit to an external power source if desired.
MaxTester Series
the screws that you have removed at step 6.
Installing or Removing the Power Meter and VFL
Maintenance
135
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the MaxTester series and is the answer not in the manual?
Questions and answers