EXFO MaxTester series User Manual page 130

Accessing Your Unit Remotely
Connecting to Your Unit with TightVNC
4. Write down the IP address.
Note: It may take a few seconds before you can see the IP address.
5. If you have configured VNC Server to start automatically when you turn
on your unit, go directly to step 7. Otherwise, the VNC toolbar, tap Start
Server.
6. From the VNC toolbar, tap Start Server.
Note: The
indicate that the VNC Server is running, and that remote connections can
be established with the unit.
7. From your computer, start the TightVNC Viewer.
120
icon appears in the upper right corner of the Home screen to
MaxTester Series