Vega VEGABAR 66 Operating Instructions Manual page 59

Electromechanical data - version IP 68
Cable entry/plug
18)
Ʋ External housing
Spring-loaded terminals for wire cross-
section up to
Connection cable between IP 68 instrument and external housing:
Ʋ Configuration
Ʋ Wire cross-section
Ʋ Wire resistance
Ʋ Standard length
Ʋ Max. length non-Ex
Ʋ Max. length Ex
Ʋ Min. bending radius at 25 °C/77 °F
Ʋ Diameter
Ʋ Cable extraction force
Ʋ Colour - standard PE
Ʋ Colour - standard PUR
Ʋ Colour - Ex-version
Display and adjustment module
Voltage supply and data transmission
Indication
Adjustment elements
Protection rating
Ʋ unassembled
Ʋ mounted into the sensor without cover IP 40
Material
Ʋ Housing
Ʋ Inspection window
Voltage supply
Operating voltage
Ʋ Non-Ex instrument
Ʋ Ex-ia instrument
Depending on the version M12 x 1, according to ISO 4400, Harting, 7/8" FF.
18)
With this extraction force, the suspension cable can be extracted out of the transmitter.
19)
VEGABAR 66 • Foundation Fieldbus
– 1 x cable gland M20 x 1.5 (cable: ø 5 ... 9 mm), 1 x
blind plug M20 x 1.5
or:
– 1 x closing cap ½ NPT, 1 x blind plug ½ NPT
or:
– 1 x plug (depending on the version), 1 x blind stopper
M20 x 1.5
2.5 mm² (AWG 14)
four wires, one suspension wire, one breather capillary,
screen braiding, metal foil, mantle
0.5 mm² (AWG 20)
< 0.036 Ω/m (0.011 Ω/ft)
5 m (16.4 ft)
250 m (820.21 ft)
180 m (591.55 ft)
25 mm (0.985 in)
approx. 8 mm (0.315 in)
≥ 650 N (146.1 lbf)
19)
Black
Blue
Blue
through the sensor
LC display in dot matrix
4 keys
IP 20
ABS
Polyester foil
9 ... 32 V DC
9 ... 24 V DC
10 Supplement
59