Parameter Adjustment With Pactware; Parameter Adjustment With Ams; Saving The Parameter Adjustment Data - Vega VEGABAR 66 Operating Instructions Manual

VEGABAR 66 • Foundation Fieldbus
7 Set up with PACTware and other adjustment programs
•
VEGACONNECT
•
Power supply unit or processing system
7.2

Parameter adjustment with PACTware

Further setup steps are described in the operating instructions
manual "DTM Collection/PACTware" attached to each CD and which
can also be downloaded from our homepage. A detailed description
is available in the online help of PACTware and the VEGA DTMs.
Note:
Keep in mind that for setup of VEGABAR 66, DTM-Collection in the
actual version must be used.
All currently available VEGA DTMs are included as a DTM Collection
on a CD. They can be purchased for a token fee from the responsible
VEGA agency. In addition, the actual PACTware version is also avail-
able on this CD.
In addition, this DTM Collection incl. the basic version of PACT-
ware can be downloaded free of charge from the Internet. Move via
www.vega.com and "Downloads" to "Software".
7.3

Parameter adjustment with AMS™

For VEGA sensors, instrument descriptions for the adjustment
program AMS™ are available as DD. The instrument descriptions are
already implemented in the current version of AMS™. For older ver-
sions of AMS™, a free-of-charge download is available via Internet.
Go via www.vega.com and "Downloads" to the item "Software".
7.4

Saving the parameter adjustment data

It is recommended to document or save the parameter adjustment
data. That way they are available for multiple use or service purposes.
The VEGA DTM Collection and PACTware in the licensed, profession-
al version provide suitable tools for systematic project documentation
and storage.
45