Vega VEGABAR 66 Operating Instructions Manual page 41

Optional settings
VEGABAR 66 • Foundation Fieldbus
6 Set up with the display and adjustment module PLICSCOM
Reset
▼
Select reset?
Reset
Basic adjustment
Peak value, measured value
Peak value, temperature
Basic adjustment
The "Reset" "Basic adjustment" resets the values of the following
menu items:
Menu section
Basic settings
Display
The values of the following menu items are not reset with "Reset:
Menu section
Basic settings
Display
Service
Default setting
Like basic adjustment, but in addition, special parameters are reset to
default values.
8)
Peak value indicator
The min. and max. distance values are reset to the actual value.
Additional adjustment and diagnosis options such as e.g. scaling,
simulation or trend curve presentation are shown in the following
menu schematic. You will find a detailed description of these menu
items in the operating instructions manual "Display and adjustment
module".
Special parameters are parameters which are set customer-specifically on
8)
the service level with the adjustment software PACTware.
Function
Zero/Min. adjustment
Span/Max. adjustment
Density
Density unit
Damping
Linearization
Sensor-TAG
Displayed value
Function
Unit of measurement
Temperature unit
Position correction
Backlight
Language
Application
Reset value
Measuring range begin
Measuring range end
1 kg/l
kg/l
0 s
Linear
Sensor
AI-Out
Reset value
No reset
No reset
No reset
No reset
No reset
No reset
41