4 Mounting
20
Fig. 11: Drilling template - wall mounting plate
Tip:
Mount the wall mounting plate so that the cable entry of the socket
housing points downward. The socket housing can be displaced by
180° to the wall mounting plate.
Warning:
The four screws of the socket housing must only be hand screwed. A
torque > 5 Nm (3.688 lbf ft) can damage the wall mounting plate.
90 mm
(3.54")
70 mm
(2.76")
3mm
(0.12")
VEGABAR 66 • Foundation Fieldbus
8 mm
(0.32")