Table of Contents
Advertisement
Controls &
Components
To reduce your risk of
serious injury, read this
entire
using machine.
Refer to Figures 2–4 and the following descrip-
tions to become familiar with the basic controls of
this tool grinder.
Guide Rod
A
Figure 2. Guide rod controls.
A. Guide Rod Dial: Moves the guide rod side to
side, parallel with the grinding wheel, for fine
tuning the position of the index bracket during
operations.
B. Guide Rod Micro-Adjust Knob: Rotates the
guide rod toward and away from the grinding
wheel to control rate of feed during opera-
tions.
C. Guide Rod Lock Lever: Locks the guide rod
in place for greater accuracy during opera-
tions.
-4-
manual
BEFORE
C
B
Spindle
E
F
D
Figure 3. Spindle controls.
D. Spindle Dial: Moves the spindle side to side,
parallel with the guide rod, to fine tune the
position of the wheel during operations.
E. Spindle Lock: When tightened, prevents
spindle from turning.
F.
Spindle Dial Lock Knob: When tightened,
prevents dial from moving.
G. Wheel Dresser: Flips down to true and dress
the face of the grinding wheel.
H. ON/OFF Switch: Starts and stops grinding
wheel rotation for main operations.
Model T10814 (Mfd. Since 5/15)
G
H
Advertisement
Table of Contents
