Table of Contents
Advertisement
Spindle Controls
By rotating the spindle dial, the grinding wheel
can be moved left and right, parallel with the
guide rod. The dial has a graduated dial with
0.0005" increments, and one full revolution moves
the spindle 0.05".
To adjust spindle:
1.
Ensure tool holder is clear of grinding wheel
to avoid accidental contact.
2.
Loosen spindle lock knob (see Figure 21).
Lock Knob
Spindle Dial
Figure 21. Locations of spindle dial and lock
knob.
Model T10814 (Mfd. Since 5/15)
3.
Rotate dial clockwise to move grinding wheel
right; rotate dial counterclockwise to move
grinding wheel left.
4.
When satisfied with spindle position, tighten
spindle lock. This will prevent dial from inad-
vertently turning during operations.
-25-
Advertisement
Table of Contents
