Grizzly T23091 Owner's Manual
  1. Manuals
  2. Brands
  3. Grizzly Manuals
  4. Grinder
  5. T23091
  6. Owner's manual

Grizzly T23091 Owner's Manual

1/4" air die grinder
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
model t23091
⁄
" air die grinder
1
4
oWner's manual
Copyright © ApriL, 2011 By grizzLy industriAL, inC.
Warning: no portion of this manual may be reproduced in any shape
or form Without the Written approval of grizzly industrial, inc.
#Cr14036 printed in ChinA

Advertisement

Table of Contents
loading

Related Manuals for Grizzly T23091

Summary of Contents for Grizzly T23091

  • Page 1 " air die grinder oWner's manual Copyright © ApriL, 2011 By grizzLy industriAL, inC. Warning: no portion of this manual may be reproduced in any shape or form Without the Written approval of grizzly industrial, inc. #Cr14036 printed in ChinA...
  • Page 2 This manual provides critical safety instructions on the proper setup, operation, maintenance, and service of this machine/tool. Save this document, refer to it often, and use it to instruct other operators. Failure to read, understand and follow the instructions in this manual may result in fire or serious personal injury—including amputation, electrocution, or death.

  • Page 3: Table Of Contents

    table of contents safety ...2 safety instructions for pneumatic tools ...2 Additional safety instructions for pneumatic die grinders ...3 section 1: introduction ...4 Foreword ...4 specifications ...4 Contact info ...4 identification ...5 section 2: setup ...6 unpacking ...6 inventory ...6 Assembly ...6 section 3: operations ...7 operation overview ...7...

  • Page 4: Safety

    When tired. visitors use correct air pressure. exceeding the maximum psi rating of this tool may cause seal damage, unpredictable operation, or line burst. Model t23091 ⁄ " Air die grinder...

  • Page 5: Additional Safety Instructions For Pneumatic Die Grinders

    Free-grinding (using one hand and no support) can allow the tooling to grab the workpiece and cause you to lose your grip on the grinder, leading to severe injury. Model t23091 ⁄ " Air die grinder speed rating. grinding bits and cut- off wheels operated at a faster speed than rated, may break or fly apart.

  • Page 6: Section 1: Introduction

    1: introduction foreword We are proud to offer this manual with your new t23091! We've made every effort to be exact with the instructions, specifica- tions, drawings, and photographs of the t23091 we used when writing this manual. however, sometimes we still make an occasional mistake.

  • Page 7: Identification

    Collet Nut this tool presents serious injury hazards to untrained users. read through this entire manual to become familiar with the controls and opera- tions before using the tool! Model t23091 ⁄ " Air die grinder identification Filter Screen Trigger figure 1.

  • Page 8: Section 2: Setup

    (figure 2) a. die grinder ...1 b. Quick disconnect Air Fitting ...1 c. Bottle for oil ...1 d. spindle Wrench ⁄...

  • Page 9: Section 3: Operations

    4. put on safety goggles, a face shield, and respirator. 5. Make sure that the grinder trigger is in the fully released position (fully out). 6. place a few drops of air tool oil into the air supply inlet, and connect the grinder to the air supply.

  • Page 10: Section 4: Accessories

    Cable air compressor and tool oil offers outstanding heat displacement and friction reduction without eating away at o-rings and other rubber components like detergent motor oils. figure 7. air tool oil. Model t23091 ⁄ " npt ⁄ " npt ⁄...
  • Page 11 Window t20451—"Kirova" clear safety glasses t20452—"Kirova" anti-reflective safety glasses t20502 t20503 h7194 figure 9. eye protection assortment. Model t23091 ⁄ " Air die grinder t20928—nuisance dust mask t21767—smart mask g7870—half mask respirator: oil / organic vapor g7871—particulate filter g7872—filter retainer...

  • Page 12: Section 5: Maintenance

    3 for location. Model t23091 ⁄ Adjust " Air die grinder...

  • Page 13: Section 6: Service

    7. incorrect affecting tool. 8. Water is entering tool. 9. Air tool motor clogged with an oil-water sludge. Model t23091 ⁄ " Air die grinder troubleshooting solution 1. reduce feed pressure; install a 2. re-adjust the throttle valve 3.
  • Page 14 2. replace throttle valve spring or o-rings. 1. repair air tool, and correct in-line oiler lubrication adjustment, or follow manual lubrication requirements. 1. Keep compressor tank drained, service, reposition, or add additional water separators in the supply system. Model t23091 ⁄ " Air die grinder...

  • Page 15: Section 7: Parts

    EXHAUST MUFFLER SCREENED FITTING BALL BEARING 626Z ENDPLATE Parts breakdown provided for reference only. Not all parts shown are available for purchase. Model t23091 ⁄ " Air die grinder main parts diagram main parts list REF PART # DESCRIPTION STEEL BALL 2MM...

  • Page 16: Warranty

    Warranty Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance. This is Grizzly’s sole written warranty and any and all warranties that may be implied by law, including any merchantability or fitness, for any par- ticular purpose, are hereby limited to the duration of this written warranty.

Table of Contents