Basic Controls - Grizzly G0763 Owner's Manual

Basic Controls

Refer to Figures 1–4 and the following descrip-
tions to develop an understanding of the basic
controls used to operate the surface grinder. This
knowledge will be necessary to safely complete
the Test Run later in this manual.
Additional details for certain controls are also
located in the Operations section.
Master Power Switch
Figure 1. Location of master power switch.
Master Power Switch: Enables power to flow to
the machine when the "l" is visible through the
switch.
-4-
Master
Power Switch
Grinding Wheel & Coolant Controls
A
B
C
Figure 2. Grinding wheel and coolant controls.
A. Power Lamp: Lights when power is flowing
to the machine.
B. Coolant Pump ON Button
C. Coolant Pump OFF Button
D. Grinding Motor OFF Button
E. Grinding Motor ON Button
F. Emergency STOP Button: Disables power
to grinding wheel motor and coolant pump.
To reset, twist the button clockwise until it
pops out.
Model G0763 (Mfd. Since 6/15)
F
E
D