Page 2
This manual provides critical safety instructions on the proper setup, operation, maintenance, and service of this machine/tool. Save this document, refer to it often, and use it to instruct other operators. Failure to read, understand and follow the instructions in this manual may result in fire or serious personal injury—including amputation, electrocution, or death.
(Mfg since 11/10) safety indicates an imminently hazardous situation which, if not avoided, Will result in death or serious injury.
Page 4
23. be aWare of hose location. hoses can easily become a tripping hazard when laid across the floor in a disorganized fashion. 24. do under influence drugs alcohol, or When tired. t23084 (Mfg since 11/10) untrained...
INTRODUCTION Foreword specifications, photographs in this manual represent the Model T23084 as supplied when the manual was prepared. However, owing to Grizzly’s policy of continuous improvement, changes may be made at any time with no obligation on the part of Grizzly.
Wheels the Model t23084 uses type 27, 5" grinding wheels with a ⁄ grizzly catalog or www.grizzly.com for a complete listing of available grinding wheels.
Replace the protective cap over the air inlet port to keep dust or debris out of the internal components. t23084 (Mfg since 11/10) lung/ear inJury hazard! Wear protective equipment when using this tool.
Page 8
PT23084041 O-RING 11MM PT23084042 BUSHING BRASS PT23086001 AIR INLET PORT 1/4" NPT PT23084044 GRIP RUBBER PT23084045 FLANGE SPANNER WRENCH PT23084046 ARBOR WRENCH PT23086037 QUICK DISCONNECT 1/4" NPT PT23083038 PROTECTIVE AIR INLET CAP PT23084049 GRIZZLY LOGO LABEL DESCRIPTION t23084 (Mfg since 11/10)