Security Settings - D-Link DSL-2640U User Manual

DSL-2640U Wireless ADSL2+ Router with Ethernet WAN Support
User Manual

Security Settings

On the Wi-Fi / Security settings page, you can modify security settings of the WLAN.
By default, the WPA2-PSK network authentication type is specified for the WLAN. WPS PIN
from the barcode label is used as the network key.
The router supports the following authentication types:
Authentication type
Open
Shared
WPA-PSK
WPA2-PSK
WPA-PSK/WPA2-PSK
mixed
Figure 66. The default security settings.
Open authentication (with WEP encryption for wireless network
modes not supporting 802.11n devices).
Shared key authentication with
type is not available when on the Wi-Fi / Basic settings page, in
the Wireless mode
devices is selected.
WPA-based authentication using a PSK.
WPA2-based authentication using a PSK.
A mixed type of authentication. When this value is selected, devices
using the WPA-PSK authentication type and devices using the
WPA2-PSK authentication type can connect to the WLAN of the
router.
Page 85 of 146
Configuring via Web-based Interface
Description
WEP encryption. This authentication
drop-down list, a mode supporting 802.11n