D-Link DSL-2640U User Manual page 36

DSL-2640U Wireless ADSL2+ Router with Ethernet WAN Support
User Manual
The interactive scheme displays the following elements:
Control
Internet
Firewall
Control
Device
MAC Filter
The Internet element displays information on the active
connection. Place the mouse pointer over the icon to switch to
another connection, remove existing connections, or add new ones.
If the cable provided by your ISP is connected to the WAN port of
the router, to the left, the name of the active connection, received or
specified IP address, and the MAC address of this connection are
displayed. For the Ethernet WAN connection, you can change the
MAC address in the editing mode or clone the MAC address of a
connected device by placing the mouse pointer over the
MAC address icon (
To the right, the approximate data transfer rate and the total value of
the received data are displayed.
The Firewall element displays the number of the IP filter active
rules. Place the mouse pointer over the icon to view the list of the IP
filter rules, remove existing rules, add new ones, or quickly switch
the filtering mode for a rule.
The Control element displays the number of blocked/allowed web
sites. Place the mouse pointer over the icon to view the list of web
sites, remove existing entries, or add new ones.
Use the Enable/Disable URL-filter switch (
disable the URL filter.
Use the drop-down list to the right of the element to quickly change
the operating mode: block access to web sites from the list or allow
access to web sites from the list.
The Device element displays the layout of your device. Place the
mouse pointer over the top right corner of this icon to display the
system menu which helps you to reboot the device, save the
configuration, restore the factory default settings, update the
firmware, exit the web-based interface.
The MAC Filter element displays the total number of clients to
which the filtering rules are applied and the number of blocked
clients. Place the mouse pointer over the icon to view the list of
filtered clients, remove existing clients, add new ones, or quickly
switch the filtering mode for a client.
Page 36 of 146
Configuring via Web-based Interface
Description
).
Clone
) to enable or