D-Link DSL-2640U User Manual page 107

DSL-2640U Wireless ADSL2+ Router with Ethernet WAN Support
User Manual
Parameter
Metric
Via Interface
After specifying the needed parameters, click the Apply button.
To edit an existing route, select a needed field in the relevant line of the table, change its value, and
click the Apply button.
To remove an existing route, select the checkbox located to the left of the relevant line in the table
and click the Apply button.
A metric for the route. The lower the value, the higher is the route
priority. Optional.
Select an interface through which the destination network can be
accessed from the drop-down list. If you have selected the <Auto>
value of this drop-down list, the router itself sets the interface on the
basis of data on connected networks.
Page 107 of 146
Configuring via Web-based Interface
Description