D-Link DSL-2640U User Manual page 66

DSL-2640U Wireless ADSL2+ Router with Ethernet WAN Support
User Manual
Parameter
VCI
Encapsulation Mode
QoS
Virtual Circuit Identifier.
Select LLC or VC from the drop-down list.
A class of traffic for this connection.
UBR
(Unspecified Bit Rate): The UBR service is used for applications
that allow various delays and losses of packets. It is appropriate to
use the UBR service for text/data/image transfer applications, as
well as messaging, distribution, retrieval, and remote terminal
applications.
UBR with PCR
(Unspecified Bit Rate with Peak Cell Rate): The UBR service is
used for applications that allow various delays and losses of packets.
The Peak Cell Rate is a determining factor in how often cells are
sent in an effort to minimize lag or jitter caused by traffic
inconsistencies. When you select this value from the drop-down list,
the Peak Cell Rate field is displayed. Specify a required value (in
cells per second).
CBR
(Constant Bit Rate): This service is used for applications that
require a constant data rate. It is mostly used for transferring
uncompressed audio and video, e.g. videoconferencing, interactive
audio (telephony), audio/video distribution (television, distance
education, e-shops), and retrieval (video-on demand, audio
libraries). When you select this value from the drop-down list, the
Peak Cell Rate field is displayed. Specify a required value (in
cells per second).
Non Realtime VBR
(Non-Real-time Variable Bit Rate): This service can be used for
transferring data that have critical response-time requirements, e.g.
air ticket booking, bank transactions, and process monitoring. When
you select this value from the drop-down list, the Peak Cell Rate,
Sustainable Cell Rate, and Maximum Burst Size fields are
displayed. Specify required values.
Realtime VBR
(Real-time Variable Bit Rate): This service is used for delay-
sensitive applications such as real time video. The Rt-VBR provides
higher network flexibility than the CBR service. When you select
this value from the drop-down list, the Peak Cell Rate,
Page 66 of 146
Configuring via Web-based Interface
Description
The valid range is from 32 to 65535.