Net; Wan - D-Link DSL-2640U User Manual

DSL-2640U Wireless ADSL2+ Router with Ethernet WAN Support
User Manual

Net

In this menu you can configure basic parameters of the router's local area network and configure
connection to the Internet (a WAN connection).

WAN

On the Net / WAN page, you can create and edit connections used by the router.
By default, a Dynamic IP connection is configured in the system. It is assigned to the WAN port of
the router. You can edit this connection or delete it.
!
Please reboot the router after creating, editing, or removing an ADSL WAN connection.
To create a new connection, click the Add button. On the page displayed, specify the relevant
values.
To edit an existing connection, left-click the relevant line in the table. On the page displayed,
change the parameters and click the Apply button.
To remove an existing connection, select the checkbox located to the left of the relevant line in the
table and click the Delete button. Also you can remove a connection on the editing page.
To use one of existing WAN connections as a default gateway, select the choice of the Default
gateway radio button located in the line corresponding to this connection.
See an example of creating several connections in the Creating Two Connections on One Channel
section, page 142.
Figure 49. The Net / WAN page.
Page 64 of 146
Configuring via Web-based Interface