D-Link DSL-2640U User Manual page 77

DSL-2640U Wireless ADSL2+ Router with Ethernet WAN Support
User Manual
Parameter
PPP IP extension
Static IP Address
PPP debug
The IP section is displayed for the Static IP, Dynamic IP, Static IPv6, and Dynamic IPv6
connection types.
Figure 59. The page for creating a new connection. The IP section.
Parameter
IP Address
Netmask
Gateway IP address
Primary DNS server/
Secondary DNS server
Obtain DNS server
addresses
automatically
Primary DNS server/
Secondary DNS server
This option is used by some ISPs. Contact your ISP to clarify if this
checkbox needs to be enabled.
Displayed for the PPPoE and PPPoE Dual Stack types only.
Fill in the field if you want to use a static IP address to access the
Internet.
Displayed for the PPPoE type only.
Select the checkbox if you want to log
debugging.
IP
For Static IP type
Enter an IP address for this WAN connection.
Enter a subnet mask for this WAN connection.
Enter an IP address of the gateway used by this WAN connection.
Enter addresses of the primary and secondary DNS servers in the
relevant fields.
For Dynamic IP type
Select the checkbox to configure automatic assignment of DNS
server addresses. If the checkbox is selected, the Primary DNS
server and Secondary DNS server fields are not displayed.
Enter addresses of the primary and secondary DNS servers in the
relevant fields.
Page 77 of 146
Configuring via Web-based Interface
Description
all data on PPP connection
Description