Menu Sections - D-Link DSL-2640U User Manual

DSL-2640U Wireless ADSL2+ Router with Ethernet WAN Support
User Manual
The web-based interface of the router is multilingual. If you need to select another language for the
web-based interface, place the mouse pointer over the English caption in the top part of the page
and select a language from the menu displayed.
The Home / Information page displays general information on the router and its software, and
data on the DSL connection state. From the page you can quickly get to some pages of the web-
based interface.
To upgrade the firmware of the router, left-click the current firmware version (the right column of
the Firmware version line) and follow the dialog box appeared.
To contact the technical support group (to send an e-mail), left-click the support e-mail address (the
right column of the Support line). After clicking the line, the e-mail client window for sending a
new letter to the specified address opens.
To edit the router's local interface parameters, left-click the IPv4, IPv6, or MAC address of the local
interface (the right column of the lines LAN IPv4, LAN IPv6, or LAN MAC correspondingly).
After clicking the line, the page for editing the LAN interface opens (for the detailed description of
the page, see the LAN section, page 80).
To configure the router's WLAN basic parameters, left-click the SSID of the WLAN (the right
column of the SSID line). After clicking the line, the Wi-Fi / Basic settings page opens (for the
detailed description of the page, see the Basic Settings section, page 83).
To configure security settings of the WLAN, left-click the network authentication type (the right
column of the Security line). After clicking the line, the Wi-Fi / Security settings page opens
(for the detailed description of the page, see the Security Settings section, page 85).
In the DSL Status section, data on the DSL connection state is displayed.
To proceed to the page for configuring the
name of the Internet protection by Yandex
change the default mode

Menu Sections

To configure the router use the menu in the left part of the page.
The Monitoring section provides an interactive scheme which illustrates the router's settings and
the LAN structure.
In the Home section you can run the needed Wizard.
Figure 20. Changing the language of the web-based interface.
directly from the general information page.
Yandex.DNS web content filtering
section. Also you can enable/disable the
Page 31 of 146
Installation and Connection
service, left-click the
service or