D-Link DSL-2640U User Manual page 74

DSL-2640U Wireless ADSL2+ Router with Ethernet WAN Support
User Manual
Parameter
MTU
MAC
Allow to create several
connections assigned
to this port
Use VLAN
VLAN ID
VLAN priority
Ethernet
The maximum size of units transmitted by the interface.
Displayed for the PPPoE, IPv6 PPPoE, PPPoE Dual Stack,
Static IP, Dynamic IP, Static IPv6, and Dynamic IPv6 types
only.
A MAC address assigned to the interface. This parameter is
mandatory if your ISP uses MAC address binding. In the field, enter
the MAC address registered by your ISP upon concluding the
agreement.
You can click the Clone MAC address of your computer icon
( ) to set the MAC address of the network interface card (of the
computer that is being used to configure the router at the moment)
as the MAC address of the WAN interface.
Also you can set the address of a device connected to the router's
LAN at the moment. To do this, select the relevant value from the
drop-down list (the field will be filled in automatically).
You can click the Restore default MAC address icon (
set the router's MAC address.
VLAN
If the checkbox is selected, the router is able to use several untagged
connections.
If the checkbox selected, the router is able to use tagged VLAN
connections.
An identifier for the VLAN. The field is displayed when the Use
VLAN checkbox is selected.
A priority tag for the type of traffic transmitted. The field is
displayed when the Use VLAN checkbox is selected.
Page 74 of 146
Configuring via Web-based Interface
Description
) to