Repairing S7-Plcsim Advanced - Siemens Simatic S7-1500 Function Manual

3.5

Repairing S7-PLCSIM Advanced

Requirements
The following conditions must be met before you can start repairing the installation:
● The hardware and software meet the system requirements.
● You have administrator rights on the installation computer.
● No other programs are active.
Procedure
To repair your installation, follow these steps:
1. Double-click the download package or insert the installation medium into the drive. The
setup program starts up automatically, provided you have not disabled the Autostart
function on the computer. If the setup program does not start up automatically, start it
manually by double-clicking the "Start.exe" file.
2. Follow the prompts until you reach the "Configuration" window. Select the "Repair" check
box.
3. Follow the remaining prompts to repair your installation.
4. Complete the repair operation by restarting your computer.
S7-PLCSIM Advanced
Function Manual, 12/2017, A5E37039512-AB
3.5 Repairing S7-PLCSIM Advanced
Installing
49