Table 7- 273 Registeronsyncpointreachedevent() - Native C - Siemens Simatic S7-1500 Function Manual

User interfaces (API)
7.6 API IInstances
RegisterOnSyncPointReachedEvent()
When the event occurs, the registered event object is set to the signaled state. Only one
event object can be registered for the event. Registering a new event object causes the
previous event object to be deleted.

Table 7- 273 RegisterOnSyncPointReachedEvent() - Native C++

Syntax
Parameters
Return values
UnregisterOnSyncPointReachedCallback()
Unregisters the callback function. When the event occurs, no callback function is called.
Table 7- 274 UnregisterOnSyncPointReachedCallback() - Native C++
Syntax
Parameters
Return values
UnregisterOnSyncPointReachedEvent()
Unregisters the event object.
Table 7- 275 UnregisterOnSyncPointReachedEvent() - Native C++
Syntax
Parameters
Return values
Table 7- 276 UnregisterOnSyncPointReachedEvent() - .NET (C#)
Syntax
Parameters
Return values
248
void RegisterOnSyncPointReachedEvent();
void RegisterOnSyncPointReachedEvent(
HANDLE* in_Event
);
•
None:
An internal event object is registered.
•
HANDLE* in_Event:
A handle for a user-specific event object. The event object is registered.
None
void UnregisterOnSyncPointReachedCallback();
None
None
void UnregisterOnSyncPointReachedEvent();
None
None
void UnregisterOnSyncPointReachedEvent();
None
None
S7-PLCSIM Advanced
Function Manual, 12/2017, A5E37039512-AB