Siemens Simatic S7-1500 Function Manual page 125

RegisterOnConfigurationChangedEvent()
When the event occurs, the registered event object is set to the signaled state. Only one
event object can be registered for the event. Registration of a new event object causes the
previous event object to be deleted.
Table 7- 73
Syntax
Parameters
Return values
Table 7- 74
Syntax
Parameters
Return values
UnregisterOnConfigurationChangedCallback()
Unregisters the callback function. When the event occurs, no callback function is called.
Table 7- 75
Syntax
Parameters
Return values
UnregisterOnConfigurationChangedEvent()
Unregisters the event object.
Table 7- 76
Syntax
Parameters
Return values
S7-PLCSIM Advanced
Function Manual, 12/2017, A5E37039512-AB
RegisterOnConfigurationChangedEvent() - Native C++
void RegisterOnConfigurationChangedEvent();
void RegisterOnConfigurationChangedEvent(
HANDLE* in_Event
);
•
None:
An internal event object is registered.
•
HANDLE* in_Event:
A handle for a user-specific event object. The event object is registered.
None
RegisterOnConfigurationChangedEvent() - .NET (C#)
void RegisterOnConfigurationChangedEvent();
None
None
UnregisterOnConfigurationChangedCallback() - Native C++
void UnregisterOnConfigurationChangedCallback();
None
None
UnregisterOnConfigurationChangedEvent() - Native C++
void UnregisterOnConfigurationChangedEvent();
None
None
User interfaces (API)
7.5 API ISimulationRuntimeManager
125