Eruntimeerrorcode - Siemens Simatic S7-1500 Function Manual

7.8.7.1

ERuntimeErrorCode

Description
This enumeration contains all error codes that are used by the Simulation Runtime API. Most
API functions return one of these error codes. If the function is successful, the return value is
always
Table 7- 428 ERuntimeErrorCode - Native C++
Syntax
S7-PLCSIM Advanced
Function Manual, 12/2017, A5E37039512-AB
. Errors are returned with negative values, and alarms with positive values.
SREC_OK
enum ERuntimeErrorCode
{
SREC_ISyntaxenum ERuntimeErrorCode{
SREC_OK = 0,
SREC_INVALID_ERROR_CODE = -1,
SREC_NOT_IMPLEMENTED = -2,
SREC_INDEX_OUT_OF_RANGE = -3,
SREC_DOES_NOT_EXIST = -4,
SREC_ALREADY_EXISTS = -5,
SREC_UNKNOWN_MESSAGE_TYPE = -6,
SREC_INVALID_MESSAGE_ID = -7,
SREC_WRONG_ARGUMENT = -8,
SREC_WRONG_PIPE = -9,
SREC_CONNECTION_ERROR = -10,
SREC_TIMEOUT = -11,
SREC_MESSAGE_CORRUPT = -12,
SREC_WRONG_VERSION = -13,
SREC_INSTANCE_NOT_RUNNING = -14,
SREC_INTERFACE_REMOVED = -15,
SREC_SHARED_MEMORY_NOT_INITIALIZED = -16,
SREC_API_NOT_INITIALIZED = -17,
SREC_WARNING_ALREADY_EXISTS = 18,
SREC_NOT_SUPPORTED = -19,
SREC_WARNING_INVALID_CALL = 20,
SREC_ERROR_LOADING_DLL = -21,
SREC_SIGNAL_NAME_DOES_NOT_EXIST = -22,
SREC_SIGNAL_TYPE_MISMATCH = -23,
SREC_SIGNAL_CONFIGURATION_ERROR = -24,
SREC_NO_SIGNAL_CONFIGURATION_LOADED = -25,
SREC_CONFIGURED_CONNECTION_NOT_FOUND = -26,
SREC_CONFIGURED_DEVICE_NOT_FOUND = -27,
User interfaces (API)
7.8 Data types
327