Uninstalling S7-Plcsim Advanced - Siemens Simatic S7-1500 Function Manual

Installing

3.6 Uninstalling S7-PLCSIM Advanced

3.6 Uninstalling S7-PLCSIM Advanced
You have two options for uninstalling S7-PLCSIM Advanced:
● You uninstall the program using the Windows Control Panel.
● You uninstall the entire product using the Setup program.
Uninstalling S7-PLCSIM Advanced using the Windows Control Panel
Proceed as follows:
1. Double-click the "Programs and Features" option in the Windows Control Panel.
2. Right-click "Siemens S7-PLCSIM Advanced V2.0" and select "Uninstall".
3. Follow the prompts for uninstallation.
4. Complete the uninstallation operation by restarting your computer.
If you do not perform a restart, the Runtime Manager continues running.
If problems occur when uninstalling PLCSIM Advanced using the Windows Control Panel,
use the installation medium for uninstalling.
Uninstalling S7-PLCSIM Advanced using the Setup program
Proceed as follows:
1. Double-click the download package or insert the installation medium into the drive. The
setup program starts up automatically, provided you have not disabled the Autostart
function on the computer. If the setup program does not start up automatically, start it
manually by double-clicking the "Start.exe" file.
If you do not perform a restart, the Runtime Manager continues running.
2. Follow the prompts until you reach the "Configuration" window. Your previous installation
is detected. Select the "Uninstall" check box.
3. Follow the prompts for uninstallation.
4. Complete the uninstallation operation by restarting your computer.
If you do not perform a restart, the Runtime Manager continues running.
Uninstalling additional software
During uninstalling the following software from the S7-PLCSIM Advanced package remains
installed:
● Automation License Manager
● S7-PLCSIM V5.4
● .NET Framework
● WinPcap
If you also want to uninstall this software, use the Windows Control Panel.
50
S7-PLCSIM Advanced
Function Manual, 12/2017, A5E37039512-AB