Onsyncpointreached Events - Siemens Simatic S7-1500 Function Manual

7.6.9.2

OnSyncPointReached events

OnSyncPointReached
Registers or unregisters an event handler method.
Table 7- 271 OnSyncPointReached - .NET (C#)
Syntax
Parameters
Return values
Exceptions
Note
RegisterOnSyncPointReachedCallback()
When the event occurs, the registered callback function is called. Only one callback function
can be registered for the event. Registering a new callback function causes the previous
callback function to be deleted.
Table 7- 272 RegisterOnSyncPointReachedCallback() - Native C++
Syntax
Parameters
Return values
Note
S7-PLCSIM Advanced
Function Manual, 12/2017, A5E37039512-AB
event Delegate_II_EREC_DT_UINT32_INT64_INT64_UINT32 OnSyncPoin-
tReached;
None. See Delegate_II_EREC_DT_UINT32_INT64_INT64_UINT32 (Page 296).
None
None
The event handler method runs in a separate thread.
void RegisterOnSyncPointReachedCallback(
EventCallback_II_SREC_ST_UINT32_INT64_INT64_UINT32
in_CallbackFunction
);
•
EventCallback_II_SREC_ST in_CallbackFunction:
A callback function that subscribes to an event.
See EventCallback_II_SREC_ST_UINT32_INT64_INT64_UINT32
(Page 281).
None
The callback function runs in a separate thread.
User interfaces (API)
7.6 API IInstances
247