Delegate_Ii_Erec_Dt_Elt_Elm - Siemens Simatic S7-1500 Function Manual

Return values
Error codes
7.8.3.4

Delegate_II_EREC_DT_ELT_ELM

Description
Table 7- 377 Delegate_II_EREC_DT_ELT_ELM - .NET (C#)
Syntax
Parameters
Return values
S7-PLCSIM Advanced
Function Manual, 12/2017, A5E37039512-AB
None
Runtime error code
ERuntimeErrorCode.OK
ERuntimeError-
Code.WarningTrialModeActive
ERuntimeError-
Code.LicenseNotFound
ERuntimeError-
Code.CommunicationInterfaceNotAv
ailable
delegate void Delegate_II_EREC_DT_ELT_ELM(
IInstance in_Sender,
ERuntimeErrorCode in_ErrorCode,
DateTime in_DateTime,
ELEDType in_LEDType,
ELEDMode in_LEDMode,
);
•
IInstance in_Sender:
An interface of the instance that receives this event.
•
ERuntimeErrorCode in_ErrorCode:
A possible error code.
•
DateTime in_DateTime:
The virtual system time of the virtual controller at the time when this event
was triggered.
•
ELEDType in_LEDType:
The LED type that changed its state.
•
ELEDMode in_LEDMode:
The new state of the LED display.
None
User interfaces (API)
7.8 Data types
Condition
The function is successful.
No license available. You can use the
instance without restrictions with the
Trial License. Afterwards, the instance
is shut down.
Test mode has expired.
A problem has occurred with the se-
lected communication interface. Check
your settings.
295