Table 7- 289 Registeronconfigurationchangedevent() - Native C - Siemens Simatic S7-1500 Function Manual

RegisterOnConfigurationChangedEvent()
When the event occurs, the registered event object is set to the signaled state. Only one
event object can be registered for the event. Registering a new event object causes the
previous event object to be deleted.

Table 7- 289 RegisterOnConfigurationChangedEvent() - Native C++

Syntax
Parameters
Return values
UnregisterOnConfigurationChangedCallback()
Unregisters the callback function. When the event occurs, no callback function is called.
Table 7- 290 UnregisterOnConfigurationChangedCallback() - Native C++
Syntax
Parameters
Return values
UnregisterOnConfigurationChangedEvent()
Unregisters the event object.
Table 7- 291 UnregisterOnConfigurationChangedEvent() - Native C++
Syntax
Parameters
Return values
Table 7- 292 UnregisterOnConfigurationChangedEvent() - .NET (C#)
Syntax
Parameters
Return values
S7-PLCSIM Advanced
Function Manual, 12/2017, A5E37039512-AB
void RegisterOnConfigurationChangedEvent();
void RegisterOnConfigurationChangedEvent(
HANDLE* in_Event
);
•
None:
An internal event object is registered.
•
HANDLE* in_Event:
A handle for a user-specific event object. The event object is registered.
None
void UnregisterOnConfigurationChangedCallback();
None
None
void UnregisterOnConfigurationChangedEvent();
None
None
void UnregisterOnConfigurationChangedEvent();
None
None
User interfaces (API)
7.6 API IInstances
253