Changing S7-Plcsim Advanced - Siemens Simatic S7-1500 Function Manual

Installing

3.4 Changing S7-PLCSIM Advanced

3.4 Changing S7-PLCSIM Advanced
Requirements
The following conditions must be met before you can start changing the installation:
● The hardware and software of the computer meet the system requirements.
● You have administrator rights on the installation computer.
● No other programs are active.
Procedure
To change your S7-PLCSIM Advanced installation, follow these steps:
1. Double-click the download package or insert the installation medium into the drive. The
setup program starts up automatically, provided you have not disabled the Autostart
function on the computer. If the setup program does not start up automatically, start it
manually by double-clicking the "Start.exe" file.
2. Follow the prompts until you reach the "Configuration" window.
3. Select the "Change upgrade" check box.
4. Follow the remaining prompts to change your installation.
5. Complete the installation operation by restarting your computer.
Note
Target directory
You cannot change the target directory because you are changing an existing installation.
48
S7-PLCSIM Advanced
Function Manual, 12/2017, A5E37039512-AB