Omron NX Series Reference Manual page 33

DC Input Units (MIL Connector, 30 mm Width)
 Items in the Summary Specifications
Item
Number of points
Internal I/O common
Rated input voltage
I/O refreshing method
ON/OFF response
time
 Data List
NX Unit
Current
power
consump-
con-
Model
tion from
sump-
I/O power
tion [W]
supply
Cou
[mA]
CPU
pler
NX-ID5142-5 0.85 0.55 No con-
sumption
NX-ID6142-5 0.90 0.60
NX-series Data Reference Manual (W525)
The number of input points provided by the Unit.
This is the polarity that the Unit uses to connect to input devices.
There are models with NPN and PNP connections.
The rated input voltage of the Unit.
The I/O refreshing methods that are used by the Unit.
Free-Run refreshing, synchronous I/O refreshing and input refreshing with input changed time are
available.
In the following table, the following abbreviations are used.
Free: Free-Run refreshing
Sync: Switching synchronous I/O refreshing and Free-Run refreshing
Changed time: Input refreshing with input changed time
The delay time for which the status change of the input terminals reaches the internal circuit of the
Unit.
The input filter time is not included.
It is described according to the ON/OFF sequence.
Unit configuration data
I/O
Input power
Wei
cur- sup- Width
ght
rent ply [mm]
[g]
[mA] metho
d
7 Exter- 85 30
nal
4.1 90
Description
Summary specifications
Num-
Num
I/O ber of Inter-
ber
data I/O nal I/O
of
size entry com-
poin
[byte] map- mon
ts
pings
2/0 1/0 16 For
point both
s NPN/P
NP
4/0 32 For
point both
s NPN/P
NP
1 Data List
I/O
Rated
refres ON/OFF
input
hing respon
volt-
metho se time
age
d
24 Sync 20/400
μs max.
VDC
24
VDC
1 - 11
1