Revision History - Omron NX Series Reference Manual

Revision History

Revision History
A manual revision code appears as a suffix to the catalog number on the front and back covers of the
manual.
Cat. No. W525-E1-14
Revision code
01
02
03
04
05
06
07
08
09
10
11
12
13
14
18
Date
April 2013 Original production
June 2013 • Added models on time stamp refreshing.
• Added Safety Control Units.
• Corrected mistakes.
September 2013 • Added new models and made changes accompanying the upgrade to
the unit version in September 2013.
• Corrected mistakes.
July 2014 Added new models in July 2014.
December 2014 Made changes accompanying the addition of the EtherNet/IP Coupler
Units.
April 2015 Added new models and made changes accompanying the upgrade to the
unit version in April 2015.
April 2016 • Made changes accompanying the addition of new models for Pulse Out-
put Unit of Position Interface Unit.
• Added Load Cell Input Unit.
• Corrected mistakes.
April 2016 Added Heater Burnout Detection Units.
July 2016 Added IO-Link Master Unit.
July 2016 Made changes accompanying the unit version upgrade of the EtherCAT
Coupler Unit NX-ECC203.
October 2016 • Made changes accompanying the addition of NY-series IPC Machine
Controller Industrial Panel PCs and Industrial Box PCs.
• Made changes accompanying the addition of the NX-series NX1P2 CPU
Unit.
• Corrected mistakes.
June 2017 • Made changes accompanying the upgrade of the NX-ECC203 unit ver-
sion to version 1.5.
• Made changes accompanying the upgrade of the NX-EIC202 unit ver-
sion to version 1.2.
• Corrected mistakes.
October 2017 Made changes accompanying the upgrade of the NX-ILM400 unit version
to version 1.1.
January 2018 Added Temperature Control Units.
Revision code
Revised content
NX-series Data Reference Manual (W525)