Omron NX Series Reference Manual page 105
Machine automation controller
Hide thumbs
Also See for NX Series:
- User manual (464 pages) ,
- Hardware user manual (222 pages) ,
- Network connection manual (51 pages)
Table of Contents
Advertisement
Temperature Input Units
NX Units
Unit
Model
version
NX-TS2101
Ver. 1.0
Ver. 1.1
NX-TS2102
Ver. 1.1
NX-TS2104
Ver. 1.1
NX-TS2201
Ver. 1.0
Ver. 1.1
NX-TS2202
Ver. 1.1
NX-TS2204
Ver. 1.1
NX-TS3101
Ver. 1.0
Ver. 1.1
NX-TS3102
Ver. 1.1
NX-TS3104
Ver. 1.1
NX-TS3201
Ver. 1.0
Ver. 1.1
NX-TS3202
Ver. 1.1
NX-TS3204
Ver. 1.1
*1. Refer to the user's manual for the EtherNet/IP Coupler Units for information on the unit versions of EtherNet/IP Units that
are compatible with EtherNet/IP Coupler Units.
*2. Refer to the user's manual for the EtherNet/IP Coupler Units for information on the unit versions of CPU Units and
EtherNet/IP Units that are compatible with EtherNet/IP Coupler Units.
*3. For connection to an EtherNet/IP Coupler Unit with unit version 1.0, You can connect only to the peripheral USB port on
the EtherNet/IP Coupler Unit. You cannot connect with any other path. If you need to connect by another path, use an
EtherNet/IP Coupler Unit with unit version 1.2 or later.
Heater Burnout Detection Units
NX Units
Unit
Model
version
NX-HB3101
Ver. 1.0
NX-HB3201
*1. Refer to the user's manual for the EtherNet/IP Coupler Units for information on the unit versions of EtherNet/IP Units that
are compatible with EtherNet/IP Coupler Units.
*2. Refer to the user's manual for the EtherNet/IP Coupler Units for information on the unit versions of CPU Units and
EtherNet/IP Units that are compatible with EtherNet/IP Coupler Units.
*3. For connection to an EtherNet/IP Coupler Unit with unit version 1.0, You can connect only to the peripheral USB port on
the EtherNet/IP Coupler Unit. You cannot connect with any other path. If you need to connect by another path, use an
EtherNet/IP Coupler Unit with unit version 1.2 or later.
NX-series Data Reference Manual (W525)
Corresponding unit versions/versions
Application with an NJ/NX/NY-series Con-
*1
troller
EtherNet/IP
CPU Unit or
Coupler
Industrial
Unit
PC
Ver. 1.2
Ver. 1.14
Corresponding unit versions/versions
Application with an NJ/NX/NY-series
*1
Controller
EtherNet/IP
CPU Unit or
Coupler
Industrial
Unit
PC
Ver. 1.2
Ver. 1.14
Application with a CS/CJ/CP-series PLC
EtherNet/IP
Sysmac Stu-
Coupler
dio
Unit
Ver. 1.19
Ver. 1.0
Application with a CS/CJ/CP-series PLC
EtherNet/IP
Sysmac
Coupler
Studio
Unit
Ver. 1.19
Ver. 1.0
Appendices
*2
NX-IO Con-
Sysmac Stu-
*3
dio
figurator
Ver. 1.10
Ver. 1.00
*2
NX-IO Con-
Sysmac
*3
Studio
figurator
Ver. 1.16
Ver. 1.00
A - 39
A
Advertisement
Table of Contents
