Qualified Service Personnel; Safety Precautions; Shipping And Storage; Mounting In Or On A Counter - Cornelius Viper E 2 Flavor Service Manual

Viper Service Manual
Q S
UALIFIED ERVICE
!
WARNING:
Only trained and certified electrical, plumbing and refrigeration technicians should service this unit. ALL WIRING
AND PLUMBING MUST CONFORM TO NATIONAL AND LOCAL CODES. FAILURE TO COMPLY COULD
RESULT IN SERIOUS INJURY, DEATH OR EQUIPMENT DAMAGE.
IF THE SUPPLY CORD IS DAMAGED, IT MUST BE REPLACED BY THE MANUFACTURER, ITS SERVICE
AGENT OR SIMILARLY QUALIFIED PERSONS IN ORDER TO AVOID A HAZARD.
S P
AFETY RECAUTIONS
This unit has been specifically designed to provide protection against personal injury. To ensure continued
protection observe the following:
!
WARNING:
Disconnect power to the unit before servicing following all lock out/tag out procedures established by the user. Verify
all of the power is off to the unit before any work is performed.
Failure to disconnect the power could result in serious injury, death or equipment damage.
!
CAUTION:
Always be sure to keep area around the unit clean and free of clutter. Failure to keep this area clean may result in
injury or equipment damage.
S A S
HIPPING ND
Before shipping, storing, or relocating the unit, the unit must be sanitized and all sanitizing solution must be
drained from the system. A freezing ambient environment will cause residual sanitizing solution or water
remaining inside the unit to freeze resulting in damage to internal components.
M
OUNTING IN OR ON A
!
WARNING:
When installing the unit in or on a counter top, the counter must be able to support a weight in excess of 450 lbs. to
insure adequate support for the unit.
Failure To Comply Could Result In Serious Injury, Death Or Equipment Damage.
NOTE: Many units incorporate the use of additional equipment such as ice makers. When any
addition equipment is used you must check with the equipment manufacturer to determine
the additional weight the counter will need to support to ensure a safe installation.
C I
ART NFORMATION AND
These carts are also designed with movable wheels that act as outriggers to provide stability to the unit when it is
being moved.
!
WARNING:
The above listed mounting bolts must be installed and the wheels extended and locked in the outboard position prior
to moving the unit.
Failure to comply could result in serious injury, death or equipment damage.
Publication Number: 621260373SER
P
ERSONNEL
TORAGE
C
OUNTER
M
OUNTING
- 2 - © 2008-2016, Cornelius Inc.