XYZ Printing da Vinci Color User Manual page 9

Function Operation and Instructions
B2 Filament Unloading filaments
1. Tap Filament Load and Unload on the
main screen.
4. When the print head has been
warmed up to 220 °C, the feeding motor
will eject the filament.
B3 Filament Refill Material
da Vinci Color will prompt you to refill material.
1. Tap the icon when printing.
4. The nozzle will be preheated and the
filament will be unloaded automatically.
6. The nozzle will be preheat and notify you when to insert filament into the feed module.
8. Check if filament is extruded from the nozzle, after confirmation, the printer will resume printing.
2. Tap "Unload" and confirm the operation.
5. When the unloading operation
completes, tap to confirm.
2. The screen will show filament status,
please tap "Refill" .
5. Replace the empty spool with a new one. (please refer to the LOADING section in this manual)
and then tap "PROCEED" .
3. Confirm the unloading operation.
3. Confirm the operation.
7. The filament will be automatically loaded.
P9