Accessing The Answering System; Getting Your Messages - Uniden DECT 3035 Owner's Manual

Accessing the Answering System

When the phone's in
standby, you can access the
system from any handset:
Only 1 handset can access
♦
the system at a time.
If you do nothing for 30
♦
seconds, the phone returns
to standby.
During remote access, the
♦
phone beeps so you know
it's waiting for the next
command.
You can press the number key shown next to each command instead of
♦
scrolling through the screens.

Getting Your Messages

To... From the base
Press
The system announces the number of new & old messages,
play new
then plays each new message (followed by the day and time)
messages
in the order it was received.
restart this
message press
replay an
earlier
press
message
skip a
Press
message
delete a While a message is playing,
message press
With the phone in standby,
delete all
press
messages
again to confirm.
play old
press
messages
stop
Press
playback
Play/SToP.
Wait at least 5 seconds after the message starts playing,
rEV.
Within 2 seconds after a message starts playing,
rEV.
fwd .
dElETE .
dElETE ; press dElETE
After the system plays all new messages,
again.
Play/SToP
Play/SToP .
Use PHONEBOOK to
4:Delete
go back to the
[ / /select]
previous option:
3:Skip
2:Play
1:Repeat
From a handset
Press
MESSagE/MuTE
select 1:Repeat.
select 1:Repeat.
Select 3:Skip.
While a message is playing,
select 4:Delete.
Not available.
select 2:Play.
Select 5:Stop.
Press MESSAGE/MUTE to start
remote operation mode.
Use CID
the next option:
5:Stop
Press
to choose the
current option
END
operation mode.
.
to go to
MENU/SELECT
OR
to exit remote
17