Table of Contents
Advertisement
Item
Receive Sensitivity
Synchronization
Backhaul
MIMO
Dimension
Installation Type
Antenna
Overall Power
Power
Weight
Note: The test method of receiving sensitivity is proposed by the 3GPP TS 36.104, which is based on
5MHz bandwidth, FRC A1-3 in Annex A.1 (QPSK, R=1/3, 25RB) standard.
1.4.2 Software Specification
Item
LTE Standard
Maximum Throughput
Business Capacity
Modulation Mode
Voice Solution
Traffic Offload
SON
Spectrum Scanning
UL Interference
Detection
RAN Sharing
Network Management
-100 dBm
GPS, 1588 V2
1 Optical (SFP) and 1 RJ-45 Ethernet interface (1 GE)
DL 2 x 2
227mm (H) x 305mm (W) x 74mm (D)
Pole, wall
External 18.5dBi directional antenna
Vertical beamwidth: 35°
Horizontal beamwidth:65°
Downtilt angle: 8.5°
Height: 30m
< 45 W
48V DC, AC adaptor (multi-national standards)
About 4.4 kg
LTE TDD 3GPP Release 9
20 MHz:
SA1: DL 80 Mbps, UL 28 Mbps
SA2: DL 110 Mbps, UL 14 Mbps
10MHz:
SA1: DL 40 Mbps, UL 14 Mbps
SA2: DL 55 Mbps, UL 7 Mbps
96 concurrent users
UL: QPSK, 16QAM, 64QAM
DL: QPSK, 16QAM, 64QAM
CSFB, VoLTE, eSRVCC
LIPA (Local IP Access)
SIPTO (Selected IP Traffic Offload)
Automatic setup
ANR (Automatic Neighbor Relation)
PCI confliction detection
Supported
Supported
Supported
TR069
4
Description
Description
Advertisement
Table of Contents
