Operating The Breast Pump - Philips AVENT SCF334 User Manual

English
16

Operating the breast pump

19.5
25
- If expressing becomes painful, stop and consult your breastfeeding
advisor or healthcare professional.
1 Wash your hands thoroughly and make sure your breasts are clean.
2 Relax in a comfortable chair (you may wish to use cushions to support
your back). Make sure you have a glass of water nearby.
3 Press the assembled pump body against your breast. Make sure that
your nipple is centered, so that the massage cushion creates an airtight
seal.
SCF334: The twin electric breast pump enables you to express milk from
both breasts at the same time. However, you can also use the appliance
to express from one breast in just the same way. Attach both assembled
pump bodies to the silicone tube and cap. We recommend to place the
cover over the other one.
4 Make sure that your nipple fits correctly in the massage cushion (see
image below). Not too tight, it is important that the nipple can move
freely, while expressing breast milk. The massage cushion should not be
too large, because this can cause pain or less effective expression.
If the cushion is not the right size for your nipples, you can purchase a
cushion of a different size separately. Two cushion sizes are available:
19.5mm and 25mm. You can find the size of the cushion on the cushion
itself (19.5 or 25).
5 Press the on/off button.
-
The breast pump automatically starts up in stimulation mode and the
on/off button and the stimulation button light up.
-
You begin to feel the suction on your breast.