Disinfection (Optional); Assembling The Breast Pump - Philips AVENT SCF334 User Manual

English
12

Disinfection (optional)

-
A household pot
-
High quality drinking water
5 min.

Assembling the breast pump

Note: To clean the valve, rub it gently between your fingers in warm
water with some washing-up liquid. Do not insert objects into the valve,
as this may cause damage.
After cleaning, if you also want to disinfect, you can boil the parts in water in
a household pot.
Supplies needed for disinfection:
Disinfect the parts in the following way:
Fill a household pot with enough water to cover all parts. Bring the water to
boil. Place the parts in the household pot and boil them for 5 minutes.
During disinfection with boiling water, prevent the bottle or other parts from
touching the side of the pan. This can cause irreversible product
deformation or damage that Philips cannot be held liable for.
Allow water to cool and gently remove the parts from the water. Place the
parts neatly on a clean paper towel or in a clean drying rack and allow them
to air dry. Avoid using cloth towels to dry the parts because they can carry
germs and bacteria that are harmful to your baby.
Note: Make sure you have cleaned and optionally disinfected the
appropriate parts of the breast pump.
1 Wash your hands thoroughly before you handle the cleaned parts.
Warning: Be careful, the cleaned parts may still be hot. Only
start assembling the breast pump when cleaned parts have
cooled down.
Note: You may find it easier to assemble the breast pump while it is wet.