Configuring Still Image Streaming - Haivision Makito X User Manual

Configuring Still Image Streaming

When creating a stream, you can specify a static image that will be used to replace the
encoded video stream when the stream is paused. This feature may be used, for example,
to block out sensitive content or deliver announcements and other messages. (See
tive Video Mute"
The supported source formats for the static image are BMP, JPEG, PNG, and GIF.
The supported output resolutions are 1920x1080, 1280x720, 720x480 (NTSC), and
720x576 (PAL).
NOTE
Still Image insertion when pausing a stream is not supported when a HEVC/H.265
video encoder is selected as a content source.
TIP
For best results, the input file resolution must be the same or greater than the output
resolution.
To upload a static image:
On the Streaming page, click
1.
The
S
for the encoder, as shown in the following example.
Makito X User's Guide, v2.0, Issue 01
on page 128.)
S
TILL
page opens, displaying the list of still images that have been uploaded
I
TILL MAGES

Configuring Still Image Streaming

from the sidebar menu.
I
MAGES
Managing the Encoder
"Selec-
162