Disassembling The Camera - i3 International Ax47R4 User Manual

4.1 Disassembling the Camera

Before mounting and adjusting the camera, follow these steps to disassemble the
camera.
4.2 Applying the Desiccant
Apply the desiccant to the inside of the Inner liner (Shroud). Make sure it does not
interfere with the movement of the lens assembly.
i3-TRNG-CAMS-Ax47R_67R-UM.indd
1. Use the provided security Torx key to
loosen three screws securing the dome
bubble housing to camera module. Do
not completely remove the screws from
the dome bubble.
2. Gently pull the dome bubble downwards
and set aside.
8
Rev. 171109