Camera Setting; Camera Control Tool; Camera Default Settings - JAI SP-5000M-CXP4 User Manual

9.

Camera setting

9.1

Camera Control Tool

In the SP-5000M-CXP4 and SP-5000C-CXP4, control of all camera functions is done by the JAI SDK
and Control Tool software. All controllable camera functions are stored in an XML file inside of the
camera. The JAI SDK and Control Tool software can be downloaded from www.jai.com.
9.2

Camera Default settings

When the camera is connected to a PC and the JAI_SDK is started up, camera setting data (XML file)
is downloaded from the camera.
The following table shows default settings of basic functions.
Image Format
Link Configuration
Acquisition Control
Trigger Selector
Trigger Overlap
Exposure Control
Gain
Gamma
Video Send Mode
SP-5000M-CXP4 / SP-5000C-CXP4
Bit allocation
Width
Height
Binning Horizontal
Binning Vertical
Acquisition mode
Trigger Mode
Trigger Activation
Trigger Source
Exposure Mode
Gain
Gain Auto
- 62 -
8-bit
2560
2048
1 (OFF)
1 (OFF)
CXP-6_4
(6.25 Gbps x 4)
Continuous
Acqusition Start
OFF
Rising Edge
Userout 3
Readout
OFF
1
OFF
1
Normal